Commercial Fleet Wraps
Fleet wraps built to
outlast the truck.
Cast-film vinyl, color-matched across every truck, installed in our shop in 3–5 days per vehicle. Edge-sealed corners, post-heat cure, written workmanship warranty — built like we know your fleet manager will see it every morning.
Fleet spec
Cast-film vinyl, post-heat cured, edge-sealed corners on every panel. The work shows for itself — and we back the install with a written workmanship warranty.
Talk to an installer ›Why fleets choose Luna Labs
A fleet that looks like one fleet — and stays that way.
When you wrap 5, 20, or 200 vehicles, consistency is the whole game. Color-matched across every truck. Same install spec. Same warranty. Same shop.
Fleet-wide color consistency
ICC-profiled, color-managed printing means vehicle #50 is an exact match to #1. Add trucks months later and they still blend in seamlessly.
Minimal downtime per vehicle
Sequenced installs and pre-printed panels keep your fleet on the road. 3–5 days per vehicle from drop-off to keys-back, scheduled around your routes.
Cast-film, never calendared
3M IJ180, Avery MPI 1105, Oracal 970RA. Cast film lasts 5–7 years; cheap calendared peels in 12–18 months. There's no in-between for a fleet.
Workmanship warranty in writing
Edge-sealed corners, post-heat cure, panel-by-panel inspection. If a panel fails in year one from our install, we re-do it. The warranty leaves with the keys.
Workmanship standard
Built for fleet life.
Every truck in your fleet leaves our shop with the same install spec. Same materials, same technique, same warranty.
- Cast-film vinyl (3M / Avery / Oracal)
- Edge-sealed corners on every panel
- Post-heat cured at 200°F
- Written workmanship warranty
What we wrap
If it has wheels and a logo, we wrap it.
Full and partial wraps for every vehicle type in a commercial fleet — single-vehicle owner-operators all the way up to multi-vehicle operations.
How a fleet wrap comes together
Five steps. Sequenced for your route schedule.
From the first walk-through to the last truck out the door, fleet wraps are a logistics game. Here's how we keep your routes running while we wrap.
Fleet audit
We walk your yard, document vehicle conditions, and confirm the color spec across every truck.
Design proof
Mockup on your exact models with color-managed print proofs. You approve before any vinyl is cut.
Print & stage
Panels print in our shop, color-matched and laminated. We hold inventory while you stagger drop-offs.
Install
3–5 days per vehicle. Edge-sealed, heat-set, inspected panel by panel. Scheduled around your routes.
Drive out
Walk-through, care guide, written workmanship warranty. Truck back on the road same day.
What we install with
The spec sheet, in plain English.
A wrap is only as good as the material under the print. We use cast-film vinyl from the three vendors that supply every fleet operator worth their salt: 3M, Avery Dennison, and Oracal.
Cast-film vinyl
- 3M IJ180Cv3
- Avery MPI 1105
- Oracal 970RA
- Air-release adhesive
Overlaminate
- 3M 8518 / 8519
- Avery DOL 1460
- UV-stable 5–7 yrs
- Matte / satin / gloss
Install spec
- Pre-clean & prep
- Post-heat 200°F cure
- Edge-seal at corners
- Panel-by-panel QC
Frequently asked
Questions fleet managers ask first.
How long does a fleet wrap last?
With cast-film vinyl and edge-sealed laminate, expect 5–7 years on most surfaces — longer for garaged trucks. Materials are warrantied up to 10 years.
How many trucks can you wrap at once?
We typically run 3–5 vehicles in a sequenced rotation so your fleet stays on the road. For large rollouts (20+) we plan staggered schedules with your route manager.
Will the wrap damage paint?
No — installed properly on factory paint in good condition, vinyl actually protects the paint underneath. We don't wrap repainted, oxidized, or damaged panels without disclosure first.
What does it cost per vehicle?
Partial wraps start around $1,500. Full commercial wraps on a standard service truck average $4,000–$5,500 depending on vehicle size, coverage, and finish. Multi-vehicle discounts kick in at 5+ trucks.
Can I add trucks to the fleet later?
That's our specialty. We archive color profiles and design files per fleet, so a new truck six months later matches the originals down to the pixel.
What about when we sell or retire a truck?
Cast-film wraps come off cleanly with controlled heat. Wrap removal is typically a half-day per vehicle — and the paint underneath stays mint.
Can you handle EV fleet wraps?
Yes. Ford E-Transit, Mercedes eSprinter, Rivian commercial, Chevy BrightDrop — same install process, same warranty, same workmanship.
Talk to our fleet specialist
Mon–Fri 8a–6p · Sat 9a–2p
200 Sterling Plaza Dr · Ponte Vedra Beach, FL
Get a fleet quote
Tell us about the fleet.
Vehicle count, vehicle types, target rollout date. We'll come back with a per-vehicle price and a sequenced timeline within one business day.